ENWA · SEN

ENWA Sen Dining

North American oak · 2200 or 3200 mm · made to order in Tokyo
$12,800
Size
Oak Finish
Charcoal
Water-based charcoal finish — ultra-thin pigment layers, hand-sanded, grain stays tactile
1

Seats 6–10 · DDP · duties included · 8–12 weeks

View in Your RoomSee it life-size in AR
ENWA Sen Dining Table — front view +Front · 3200
ENWA Sen Dining Table — side profile +Side · 3200
Sen Dining Table in a dining room +In Use
Sen Dining Table — the dissolved edge detail +The Dissolved Edge

// SPECIFICATION

materialwhite oak (FAS)
buildpanel-built solid
dim mm3200 · 1300 · 730
seats8–10
mass≈ 85 kg
lead8–12 wk · DDP
full spec

Kiln-dried twice · 19 days prep · FAS grade oak · the ENWA Edge runs the full perimeter

// THE THESIS

Where every seat
is the best seat.

01

The table that anchors the room.

Sen Dining Table in a dining room

The Sen is the flagship of the ENWA collection — the piece where every design principle converges at scale. Available in 2200 mm (seats six) and 3200 mm (seats ten), it's deliberately oversized by Japanese standards. Because our team is international, we design for the world: rooms where a dinner party isn't four people.

Most furniture adapts to the space. The Sen defines it.

At up to 1300 mm deep it sets the proportions of the room around it — not the other way around.

Sen Dining Table — gathering
STUDY · BUILT FOR GATHERING
Sen Dining Table — dissolved edge
STUDY · THE DISSOLVED EDGE
02

The edge is the defining detail.

Sen Dining Table — the ENWA Edge

The edge is where a table is touched most — every time someone pulls up a chair, leans forward, rests their forearms. Most tables treat it as an afterthought. The Sen makes it the defining detail: the ENWA Edge runs the full perimeter, a continuous curve that looks razor-thin from across the room but feels impossibly soft when your hand finds it.

Razor-thin from across the room — soft under the hand.

Sen Dining Table in a dining room
THE EDGE, IN THE ROOM
03

Not cut from one log — on purpose.

Sen Dining Table — panel-built oak top

A top up to 3200 mm long would split and cup if cut from one piece. So we refused to. The Sen is panel-built from combined solid North American oak boards — grain laid against grain — so even the longest top holds its line for generations.

The same signature curve runs the full perimeter, transitioning smoothly from top to leg so the table reads as one continuous form at any scale. The difficulty is invisible. That's the point.

We chose permanence over the easy story.

·

The proof, in numbers.

Two honest comparisons: how many the Sen seats at full length, and how long solid oak lasts against veneer.

// SEATS · PEOPLE
Typical 1800
6
ENWA Sen 2200
6–8
ENWA Sen 3200
8–10
// SERVICE LIFE · YEARS (RESTORABLE)
Particleboard
~6
Veneer / MDF
~12
ENWA solid oak
50yr+
Sizes2200 · 3200 mm
Depth1100 · 1300 mm
Height730 mm
Seats6–8 (2200) · 8–10 (3200)
EdgeENWA Edge · full perimeter
OakFAS solid white oak · 1,350 Janka
FinishCharcoal · water-based, hand-sanded
LifespanRestorable — re-oil, sand, keep
Structural geometry resolved before fabrication. Lifespans: conservative service estimates by construction.
More information
·

The object, studied.

Sen 3200 — front elevation
STUDY 01 · 3200 · FRONT
Sen 2200 — front elevation
STUDY 02 · 2200 · FRONT
Sen — side profile
STUDY 03 · THE SIDE PROFILE
Sen — edge detail
STUDY 04 · THE DISSOLVED EDGE
·

Turn it yourself.

VIEWPORT · ENWA-01 SOLID WHITE OAK · FAS drag to orbit · scroll to zoom · AR on mobile
04

Two sizes, one table.

2200 mm seats six to eight; 3200 mm seats eight to ten. The longer one seats ten — comfortably. Every seat equally good, no sharp corners anywhere around the perimeter.

Sen 2200
2200 · SEATS 6–8
Sen 3200
3200 · SEATS 8–10
Sen in a dining room
IN THE DINING ROOM
05

One finish, done properly.

Sen Dining Table in charcoal oak

The Sen is finished in charcoal — our most difficult finish to develop. Deep enough to read as charcoal across the room, thin enough to keep every grain ridge tactile under the hand. Built from multiple ultra-thin pigmented layers, each hand-sanded before the next.

In raking light, the oak reveals itself through the black.

Water-based, applied in multiple passes. It protects without concealing — you feel the grain, not a coating.

06

Pairs with Yume.

Sen Dining Table set with Yume Chairs

At 730 mm the Sen meets the Yume Chair's 455 mm seat the way it should — room for the knees, the long dinner, the gathering that doesn't end at dessert. Order six chairs for the 2200, eight to ten for the 3200; the same edge geometry runs both.

Built to gather around — for years.

07

Built for gathering.

Sen Dining Table in a generous dining room

A long dinner that runs past dessert. A working surface big enough to spread out on. A room organised around one generous oak plane. The Sen sets the proportions of the room — and gives every seat the same view across the table.

Where a dinner party isn't four people.

Sen Dining Table in a dining room
THE DINING ROOM · AT REST
Sen Dining Table in a warm interior
THE WARM INTERIOR
Sen Dining Table set for dinner
SET FOR DINNER · IN USE
Sen Dining Table with chairs
BUILT FOR GATHERING
08

The patience the eye can't see.

Before a single cut, the oak is kiln-dried twice over nineteen days — because moisture is the enemy of a clean joint. Every joint is tested with a flashlight: if light passes through, it isn't done. The full top is machined to a computed profile, then every edge hand-shaped to match.

The work you can't see is the reason for the work you can.

0days kiln-dried
0mm at full length
0lbf janka
0yr warranty
ENWA Sen Dining Table dimensions — 3200 x 1300 x H730
// 08 · DIMENSIONS & SPEC

Two sizes,
one generous table.

Length3200 mm
Depth1300 mm
Height730 mm
Weight≈ 85 kg
Seats8–10
MaterialSolid white oak · FAS
Sizes2200 ($9,800) · 3200 ($12,800)
ConstructionPanel-built solid boards
Oak hardness1,350 lbf Janka
EdgeENWA Edge · full perimeter
FinishCharcoal · water-based, hand-sanded
DesignMililab Design Team, Tokyo
Pairs withYume Chair
Lead time8–12 weeks, made to order
ShippingDDP to 34 countries
More information
09

Questions & answers.

The 2200mm table comfortably seats 6–8 people. The 3200mm table seats 8–10. We recommend the Yume Chair, which pairs perfectly with this table.

Each piece is made to order. Production takes 8–12 weeks. Shipping time varies depending on your location. We keep you updated throughout.

Yes — DDP delivery to 34 countries (US, Europe, Middle East, Japan, Asia Pacific). Shipping and import duties are calculated at checkout. No surprise charges at delivery.

Visit our Tokyo showroom by appointment. Contact us to schedule a viewing where you can experience the craftsmanship firsthand.

Every ENWA edge is designed using digital tools from architecture. The edge profile follows a continuous curve — it looks impossibly thin from across the room but feels soft and rounded when you run your hand underneath. This is the 'edge paradox' that defines the collection.

The Sen Dining Table is designed by Mililab, an architecture and design studio based in Tokyo, Japan, as part of its ENWA collection of eight solid-oak pieces. Mililab applies the same edge geometry it uses in architecture to furniture, and ships direct, DDP, to 34 countries.

·

The ENWA Collection