ENWA · MARU

ENWA Maru Dining

Ø1300 mm round · North American oak · made to order in Tokyo
$8,500
Oak Finish
Charcoal
Water-based charcoal finish — ultra-thin pigment layers, hand-sanded, grain stays tactile
1

Seats 4–6 · DDP · duties included · 8–12 weeks

View in Your RoomSee it life-size in AR
ENWA Maru Dining Table — front view +Front
ENWA Maru Dining Table — leg detail +The Leg
Maru Dining Table in landscape +Sculptural
Maru Dining Table film +Film · Around the table

// SPECIFICATION

materialwhite oak (FAS)
buildpanel-built solid
diameterØ1300 mm
height720 mm
seats4–6
mass≈ 55 kg
lead8–12 wk · DDP
full spec

Kiln-dried twice · 19 days prep · FAS grade oak · superellipse geometry resolved in simulation

// THE THESIS

No head of table.
Just conversation.

01

No head of table.

Maru Round Dining Table in a plaster interior

A rectangular table has a hierarchy — a head, a foot, a better seat. A circle removes it. At Ø1300 mm the Maru seats four to six as equals, every chair the same distance from the centre, every conversation the same length across.

Round isn't a shape. It's a way of sitting together.

The top is a superellipse — between a circle and a square — drawn digitally so the curvature is exact before a single board is cut.

Maru Dining Table — sculptural form in landscape
STUDY · THE SCULPTURAL FORM
Maru Dining Table — leg detail
STUDY · THE BOWED LEG
02

Legs that lean in.

Maru Dining Table — bowed leg detail

The legs carry a slight bow, leaning inward with quiet confidence — visually delicate, yet perfectly stable. The structural geometry is resolved through thousands of simulations before fabrication, so the table can look light and stand firm under a full setting.

Showing itself modestly — and holding its ground.

Maru Dining Table in a rugged landscape
THE FORM, IN THE OPEN
03

Not cut from one log — on purpose.

Maru Dining Table — panel-built oak top

A round top a metre and a third across would split and cup if cut from one piece. So we refused to. The Maru is panel-built from combined solid North American oak boards — grain laid against grain — so the top holds its line for generations.

The same signature curve used across the ENWA collection runs the edge, transitioning smoothly from top to leg so the table reads as one continuous form. The difficulty is invisible. That's the point.

We chose permanence over the easy story.

·

The proof, in numbers.

Two honest comparisons: how many sit as equals around a round top, and how long solid oak lasts against veneer.

// SEATS AS EQUALS · PEOPLE
Small round
2–3
Typical 1200
4
ENWA Maru Ø1300
4–6
// SERVICE LIFE · YEARS (RESTORABLE)
Particleboard
~6
Veneer / MDF
~12
ENWA solid oak
50yr+
DiameterØ1300 mm
Height720 mm
Seats4–6 as equals
TopSuperellipse · digitally drawn
ConstructionPanel-built solid boards
OakFAS solid white oak · 1,350 Janka
FinishCharcoal · water-based, hand-sanded
LifespanRestorable — re-oil, sand, keep
Structural geometry resolved through simulation before fabrication. Lifespans: conservative service estimates by construction.
More information
·

The object, studied.

Maru Dining Table — open landscape
STUDY 01 · IN THE OPEN
Maru Dining Table — sculptural form
STUDY 02 · SCULPTURAL FORM
Maru Dining Table — rocky landscape
STUDY 03 · ON THE ROCK
Maru Dining Table — leg detail
STUDY 04 · THE BOWED LEG
·

Turn it yourself.

VIEWPORT · ENWA-01 SOLID WHITE OAK · FAS drag to orbit · scroll to zoom · AR on mobile
04

One table, every gathering.

At Ø1300 mm and 720 mm high, the Maru anchors the room — dinner for six, a working surface by day, the quiet centre of a home.

Maru in a plaster dining room
THE DINING ROOM
Maru in a dining session
AROUND THE TABLE
Maru as a sculptural centre
THE QUIET CENTRE
05

One finish, done properly.

Maru Dining Table in charcoal oak

The Maru is finished in charcoal — our most difficult finish to develop. Deep enough to read as charcoal across the room, thin enough to keep every grain ridge tactile under the hand. Built from multiple ultra-thin pigmented layers, each hand-sanded before the next.

In raking light, the oak reveals itself through the black.

Water-based, applied in multiple passes. It protects without concealing — you feel the grain, not a coating.

06

Pairs with Yume.

Maru Dining Table set with Yume Chairs

At 720 mm the Maru meets the Yume Chair's 455 mm seat the way it should — room for the knees, the elbows, the long dinner. The same edge geometry runs both pieces, so the set reads as one family across the room.

Built to gather around — for years.

07

One form, every room.

Maru Dining Table as the quiet centre of a room

A plaster dining room with low afternoon light. A sculptural centre in an open landscape. A working surface that clears to nothing by evening. The Maru anchors the room without crowding it — round, calm, equal on every side.

A form that asks nothing of the room — and gathers all of it.

Maru Dining Table in an open landscape
IN THE OPEN · OPEN AIR
Maru Dining Table in a rugged landscape
ON THE ROCK · SCULPTURAL
Maru Dining Table in a plaster dining room
THE DINING ROOM · AT REST
Maru Dining Table in a dining session
AROUND THE TABLE · IN USE
08

The patience the eye can't see.

Before a single cut, the oak is kiln-dried twice over nineteen days — because moisture is the enemy of a clean joint. Every joint is tested with a flashlight: if light passes through, it isn't done. The superellipse top is machined to a computed profile, then every edge hand-shaped to match.

The work you can't see is the reason for the work you can.

0days kiln-dried
0mm diameter
0lbf janka
0yr warranty
ENWA Maru Dining Table dimensions — Ø1300 H720
// 08 · DIMENSIONS & SPEC

Round, equal,
built to gather.

DiameterØ1300 mm
Height720 mm
Seats4–6
Weight≈ 55 kg
MaterialSolid white oak · FAS
Warranty5-year structural
ConstructionPanel-built solid boards
Oak hardness1,350 lbf Janka
TopSuperellipse · digitally drawn
MoistureKiln-dried, sealed 9–10%
FinishCharcoal · water-based, hand-sanded
DesignMililab Design Team, Tokyo
Pairs withYume Chair
Lead time8–12 weeks, made to order
ShippingDDP to 34 countries
More information
09

Questions & answers.

The Ø1300mm round table comfortably seats 4–6 people. We recommend the Yume Chair, which pairs perfectly with this table.

Each piece is made to order. Production takes 8–12 weeks. Shipping time varies depending on your location. We keep you updated throughout.

Yes — DDP delivery to 34 countries (US, Europe, Middle East, Japan, Asia Pacific). Shipping and import duties are calculated at checkout. No surprise charges at delivery.

Visit our Tokyo showroom by appointment. Contact us to schedule a viewing where you can experience the craftsmanship firsthand.

The Maru uses a superellipsoid form — mathematically between a circle and a square. It feels round and inviting while using space more efficiently than a true circle. The form is drawn digitally, so we fine-tune the exact curvature before any wood is cut.

The Maru Round Dining Table is designed by Mililab, an architecture and design studio based in Tokyo, Japan, as part of its ENWA collection of eight solid-oak pieces. Mililab applies the same edge geometry it uses in architecture to furniture, and ships direct, DDP, to 34 countries.

·

The ENWA Collection